Upgraded High Precision Touch Screen 3D Printer
$223.48 – $452.91
- Item Type: 3D Printer
- Build Size: 180 x 180 x 180 mm / 7.09 x 7.09 x 7.09 inch
- Printing Technology: FDM
- Nozzle Quantity: 1
- Print Precision: 0.05-0.3mm
- Nozzle: 0.4 mm / 0.02 inch
- Filament Diameter: 1.75 mm / 0.07 inch
- Filament: PLA/Wood/TPU/ABS
- Nozzle Temperature: ≤260℃
- Hotbed Temperature: ≤110℃
- File type: STL/Obj/Afm
- Printing Via: USB Cable and TF Card
- Software: Cura/Slicer/Repetier-Host
- Operating Systems: Win7/8/10/Mac/Linux
- Movement Speed: 200mm/s
- Max Print Speed: 100mm/s
- Print Speed: ≤100mm/s
- Machine Power: 240W
- Rated Voltage: 220V-50hz 110V-60hz
- Power Supply: 24V/15A/360W
- Machine Size: 280 x 285 x 370 mm / 11.02 x 11.22 x 14.57 inch
- Weight: 6 kg / 13.23 lbs
Package Includes:
- 1 x Set
G***r –
조립도 쉽고 출력퀄리티도 너무 좋슴니다. 배송도 일주일정도면 와서 금방 써볼수있었네요
J***s –
Everything perfect, quick assembly and print, sent rapidísimo. Very happy. What sounds most are the fans. The perfect rest came very tight from everything.
B***b –
Just cool.
J***a –
Печатает из коробки лучше, чем мой старый anet a8 после года танцев с бубном вокруг него. В комплект с принтером я заказал стекло, но к нему не приложили вообще никакого крепления, даже канцелярских прищепок, имейте это в виду.
A***n –
Доставили за 6 дней в Волгоград до двери. Спасибо, все целое, все работает.
D***n –
After blowing noisy and cooling only one side it is necessary to finish, a small Luft in the guides, the ends on the first badly triggered I do not know what will happen next.
P***y –
I came to Stavropol in five days from the Russian warehouse (Podolsky warehouse). I collected my wife, two bolts tighten and calibrate the table. Printed out of the box almost perfectly. Checked the function of continuing printing. Twice turned off the power during the printing, the model turned out to be excellent.
K***v –
Fast shipping. Didn’t tested yet.
S***V –
з Заказ пришел за 10 дней. Принтер супер. За полчаса собрал и откалибровал. Сразу же напечатал прищепку с SD карты
V***v –
The printer works out of the box, checked on PLA and PETG. Delivered to the doors in 5 days. Thank you store.
V***y –
Fast delivery! Works from the box ! Much MUCH better than Creality Ender. Recommended. Cooling fans are litle noisy.
D***n –
10 days delivery. Assembly takes 5 minutes. Table calibration for another 5 minutes. Prints without additional settings. Noise like a robot vacuum cleaner
R***r –
The driver TMC 2225 goods on 24.5 Volt much Hach set. After opening the case are 2 heatsinks drained lallen. The driver could only on Min. 19.5 volts. The result was satisfactory. The temperature on dei x-axis dropped from 65 ° to 42 °. The two G-code dareien were precise printed what before that. Not possible was:-(
J***v –
Ogonische! Advise!
S***k –
It’s best
E***o –
Thank you very much for the parcel. Seller recommend. I blew the meter when the parcel got stuck behind one of the mail offices. We begin to master
K***v –
Long disassembled)) you need glass necessarily!! Table to center sagging
A***l –
ok