SKR V1.4 BTT SKR V1.4 Turbo Board For 3D Printer
$53.66 – $74.60
- Item Type: SKR V1.4 BTT SKR V1.4 Turbo Board
- Size: 84.3 x 109.7 mm / 3.32 x 4.32 inch
- Microprocessor: ARM COrtex – M3 CPU
- Input Voltage: DC12V – DC24V 5A – 15A
- Logic Voltage: DC 3.3 V
- WIFI Module:ESP – 01S
- Supported Machine Architecture: XYZ, Delta, Kossel, Ultimaker, Corexy
Package Includes:
- 1 x Pc
F***r –
All ok for my Ender-3 😀
E***X –
New skr2 Version b, as always you are the beststore ! Thank you so much
O***v –
The quality of the soldering is normal. Seller recommend. I will continue to order from him.
0***r –
came faster than expected. works fine @12 prints so far.
Z***B –
Ok
T***i –
Good quality, nice and quick response of supporting
T***y –
Fast shipping the board looks good-now I gave it still not tested.
Customer –
Спасибо за бонусную уточку
Customer –
work well
M***y –
Similar products to the announcement, serious store fast delivery, I highly recommend this seller
V***z –
Thanks for the weft
G***s –
parfait
S***v –
It was very difficult to find 1.4 turbo. But the supplier sent everything very quickly. This is the best of this series of boards. 2.0 buggy in many.
A***s –
Fully corresponds to the description. Thanks for the gift!)
G***i –
Perfect
A***y –
Externally, everything is fine, there is no way to check yet.
S***z –
Very nice. No tracking but didn’t take too long.
Customer –
I am satisfied with the product
P***v –
A good fee, there is no flash drive in the kit, as some write. Perfectly adjusted-rose from the first time Klipper. Checked-no bug from the first audit.
K***a –
Good.
C***r –
Good product as usual for bigtreetech. Thanks
M***a –
Product excellent quality, very good
J***a –
All perfect, thank you very much!
A***h –
Cool fee! I do not see any strong differences from Skr 1.4 turbo.
M***n –
High quality board. Complete set. Funny duckling :-). Shipping fast.
V***v –
Quality packaging. The board looks good, without damage and obvious jambs. It remains only to check in the work.
T***v –
Everything is fine, it came fast, but there is a problem, the WiFi module is the one that does not work with the SCR 2 board on the photo, under this board you need to buy a small module that is similar to the driver and is inserted similarly… this if you use the firmware RRF
B***l –
Plaques!
P***i –
great product , very good sevice
A***r –
Die Boards entsprechen der Beschreibung, sind in einem angemessen Zeitraum geliefert worden, und wurden sehr gut verpackt. Ich bin mit BTT sehr zufrieden. Danke für die Duck. Habe schon eine ganze Familie
V***v –
Everything works, the Ducks are cute
Customer –
The quality of the soldering is excellent, the board is clean, everything is flat, the eye pleases. All correct, except for one contact leading to the LCD screen, because of this button work not all and not as necessary. Team bigtreetech quickly solved this problem by sending a new fee in return. Quite unexpectedly as for this trading platform. With this store it’s nice to do business) All drivers are correct, quiet, do not complain.
A***h –
In the description it is indicated suitable for the encoder 3.but the board is much more and does not fit into the case. Issued a refund and ordered a Mini 3
M***r –
The fee came pretty quickly. Took on Ander 3. poured the firmware, it works more than 2 weeks. No failures in work. All the information on payment is on the githab. Excellent goods
A***h –
this is the Rev.B the better version. it’s got LOADS of features and you will spend daaaays just experimenting and testing it. THEN, you will spend DAAAAAAYS to figure out which thingiverse STL case to 3D print for it. because it’s marginally larger than any ender 3 main board and will not fit in the original casing. a piece of advice, get the TMC2209, get the BIQU H2, and the BTT LCD. your 3D printer will turn into a BEAST!
A***v –
The scarf is not bad. In principle, everything you need is there. Конфиgi, rapping, articles of pioneers) relatively easy to start and on the gauze and on the Clipper even humanitarius))
A***v –
It came quickly. Everything is fine, with the firmware under Ander had to hang out… but everything turned out. The printer’s already working. Thank you.
Customer –
Very fast delivery. Everything worked.
M***i –
ok
R***n –
All right. As always with BTT came fast and I’m glad to check it’s a REV b. Incorporates the “hy1904” component
R***r –
The board is made qualitatively, all as in the description. True no SD card. Long could not run-pouring firmware from Skr 1.4 turbo, until I looked at the processor and realized-it’s SKR 2.
J***v –
Perfect! Order delivered in 10 days
G***a –
all good
Customer –
fast delivery and good package
A***n –
Very Good store, recommended. very supportive although board was faulty but got refunded and ordering new board again
G***r –
Not only came the memory card. Privatization of Post Office and stick Naked’s ass Bolsonaro $5.50. Bixo
A***v –
On the action took for 2386₽ price just fire for such a fee. Delivery to Samara 15 days. Kit: Audit Board B, cable, duck, but flash drives do not have other at least 128 MB Yes was. Put Marlin 2.0.9 all OK
Customer –
All the best very fast delivery all top
V***v –
Fluttering! I’ll give you one piece of advice. Be sure to immediately check the working capacity of the board. There’s a marriage. And not so rare. At the meeting this company goes with very much reluctant and not always. Unfortunately, I did not check immediately and the dispute to Open also. The fee came with marriage and burned the CPU. The month of correspondence with the support service, the answers to the same questions with photos and videos gave the result, only in harmony that the fee was with the factory marriage. 3 weeks I was fed with breakfast, which will return funds for the damaged goods. It’s been 4 weeks and 3 months since the call to support. The funds never returned. Messages are no longer answered. I had to buy a new fee. Be careful.
Customer –
Everything was OK, works perfectly. I recommend.
I***v –
What can I say about this fee: an excellent product, although expensive. In one printer I have a board of the first audit with a dirty Mosset, in another put this-the flight is normal. I use SKR 2 in total for about half a year. Some people continue to stick drivers even 2 audits, but in my case everything is fine. Pleases the presence of several connectors for controlled fans and a connector for RGB tape. The only negative is the price. But now with electronics as a whole is tight. Gone era SKR 1.3 to 1200-1500 R for a fee (delivery was fast, packing good. Seller honest. Can take
S***v –
Audit B, missed Marlin without problems.
A***r –
On Thursday evening ordered and on Saturday mornings. Never so get a fast delivery at AliExpress.
Customer –
Super fasr shipping 🙂
A***a –
I came quickly. I’m testing now. In general, the quality is at an altitude, but not without Ixians. 1. packing is crumpled-can be seen in the photo 2. the table’s MOSFET was crooked. I suffer with the connection of the board and the screen biqu tft24-v. 1.1 s On the results of the setting I will cancel 🙂 5 stars in absentia.