3D Printer With LCD Screen
$239.60 – $610.01
- Item Type: 3D Printer
- Connectivity: USB
- Technology: LCD-based SLA
- Light – Source: high-quality filament（wavelength 405nm）
- XY Res: 0.051 mm 2560 x 1620（2K）
- Z Axis Res.: 0.01 mm
- Layer Res.: 0.01 ~ 0.15 mm
- Printing Speed: MAX 50 mm / 1.97 inch / h
- Rated Power: 45 W
- Printer Size: 227 x 222 x 383.6 mm / 1.06 x 8.74 x 15.10 inch
- Build Volume: 130 x 82 x 165 mm / 5.12 x 3.23 x 6.50 inch
- Material: 405 nm UV Resin
- Net Weight: 4.3 kg / 9.48 lbs
Package Includes:
- 1 x Set
A***y –
Everything is fine, one part of the store sent by post of Russia and wrongly indicated another index-I had to go to the far end of the post office. And so everything is super, I recommend the seller!
Y***n –
Все Ок.
Customer –
excelente
M***v –
Fast. Prints from the box.
M***v –
This is the second printer from this store, all clearly, delivery 4 days
D***v –
Prints well, as far as I understand the green “model” Plastic is one of the most fragile. Printed 9 cm high yoda master figure, hollow inside, 1,1mm wall thickness. Support has been delayed very easily. When folding until fixing, the UV was suppressed to a degree 45 angle, then broken. The figure itself is also slightly elastic after roasting when pressing. When exposed to a brush, the piece breaks like caramel. From another plastic it is possible to get even household things to print, which do not require heavy load. In general, very satisfied. The smell of resin is not strong, as expected. Constantly in the living room of course you can not use, but occasionally it is possible. The resin is edible, when you hit the plastic case a little bit of a connector. The smell from the finished figure is not strong, a little chemical, like from paint.
I***n –
Excellent thing, but with the settings two days had to suffer and half a jar of resin lime. Now there is an understanding of the process and fine settings. The printer himself arrived at the beginning, the next day the camera of light and two more days later resin. In general, I’m happy as an elephant.)))
A***v –
Excellent product. The store is very nice and he will do everything possible to satisfy the customer. Excellent service! I’m recommending the seller and I will buy from him again!
B***y –
All received, two models printed, well suited for all kinds of board games, something large will be problematic to print. Only here the printing speed is not very happy. On average, 3 hours on a miniature, as in the photo, but this I already want too much.
O***k –
I saw everything in the description, good, in the robot
D***i –
Excellent deal! The printer is open in the Internet, so I just agree with this opinion on the case, setting up from opening the package to printing the probe in a couple of minutes and the result is wildwild We arrived all in the specified period of express delivery to Russia, but in three different parcels (received devices in pochtomat, on a day later came resin to the local office of of office the store is cosmic and quickly answers (you can even try to ask for the colors you need resin with :). In general, a firm five for all points and I advise you to buy)
Customer –
Everything works, the store is sociable
I***s –
Everything is gorgeous, it works as it should 1,5 liters already spent
F***. –
Hello, the goods came very quickly, do not be afraid of shipping from Germany, a few days and it is :). The goods are packed really well, a lot of foam inside and outside, nothing flies loosely.
D***w –
I came to St. Petersburg in four days. Works, everything is super, in print has not yet checked
A***k –
Prints perfectly, but very noisy. On the Z axis is the cheapest a4988 as a result of the noise such that it is not comfortable to be in the same room with it.
P***o –
As the first printer is not bad. Before Ukraine went from Germany. customs detained for a month (hate customs). Slightly repainted the console to the left, but this is not deadly (most likely it will be necessary to look at the console adjacent to the carriage rails). The printing speed of the local photopolymerom-2.6c, I’m quite satisfied. I think to the output photon ultra-I will Master photopolymer printing
R***v –
To Novosibirsk in 10 days. Everything is intact. Recommend.
S***v –
Prints straight from the box. Everything is perfectly packed. All satisfied
R***z –
The first two prints have come out perfect. I used resin chosen Walter washable.
I***v –
Excellent printer, with the first time test cube and no problems, the only delivery is not much delayed, but still very fast
Customer –
The printer was zatestyla, it works fine. True, there were mistakes, but it turned out that the iron plate was screaming, my jamb. See that it stood exactly when you start printing, nowhere and in YouTube about this moment do not write. And so the quality of the print is very cool, although I had to wait a month, because they did not have a white resin.
O***v –
The printer is just super. Mist exotr and customs is just * ope week in Ukraine and a month on it paid extra. At customs at 978 UAH. When buying a printer with resin 255 Dole.
R***u –
The printer came fast. There were problems from the delivery service, but this does not apply to either the store or the quality. As for quality. Great packaging. The printer is packed just fine. The box came externally a little bit broken, but it did not affect the inside. The printer itself is very neatly collected. Luftov and not docking is not present. The printer looks like products of a serious world brand level company. Everything is in place, the processing of joints and nodes is good. I was recommended on the forum to carefully check and tighten the printer. I didn’t. Everything is already well assembled. The resin in the kit is very smelly. But it was already known. Now there is the first printing, the printer is closed with a lid and prints. No smell. In general, I’m still happy. I hope any problems will not come out in the future. Thank you.
G***r –
Sends very fast I recommend
Д***р –
Sent fast, arrived on time, packing good. I pulled a test cube from the box. Corresponds to the declared characteristics. A beautiful space for creativity, limited only by imagination.
D***v –
Everything is fine
D***i –
Despite the problem of delivery of one of the two products because of our splendid Swiss customs, everything went well
H***k –
The statement is too good. English letters address and name the patted, korean Alphabet name and clearance $ number prompted the late please look in A little time, south Korea customs in some took, but store’s shipping is fast way. Resin in Korea purchasing, the enclosed USB trepanned cubic shape of testers are well come out. Soap mold made for View saw ancient impact testing, 3D printer output water is unusable fine details and sleekly sought. Much research should do it for you.
R***s –
Arrived very quickly. description corresponds. in work checked. everything is fine.